Order Products : sales@su-jiao.com
RTP 6035-64A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8Dggo1_RTP-6035-64A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Water Clear - Polystyrene Bondable |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.4 to 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 2.00 | MPa | |
| 100% Strain | 2.34 | MPa | |
| 300% Strain | 3.65 | MPa | |
| Tensile Strength (Yield) | 12.4 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 1400 | % | ASTM D412 |
| Tear Strength 1 | 52.5 | kN/m | ASTM D624 |
| Compression Set 2(23°C, 22 hr) | 23 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 177 to 216 | °C | |
| Mold Temperature | 10.0 to 32.2 | °C | |
| Injection Pressure | 27.6 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® A3ZM2 BK30564 | BASF Corporation | Nylon 66 | Ultramid® |
| APEX® 3311-90NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Europrene® N 4560 | Versalis S.p.A. | NBR | Europrene® |
| Flexalloy® 9400-70 | Teknor Apex Company | PVC Elastomer | Flexalloy® |
| Hostalen CRP 100 S blue | LyondellBasell Industries | HDPE | Hostalen |
