Order Products : sales@su-jiao.com
VAMPLUB F 15C 2TF
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Vamp Tech |
| Trademark: | VAMPLUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 85pbBu_VAMPLUB-F-15C-2TF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPS 15% carbon fiber reinforced with PTFE. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.20 | % | |
| Across Flow | 0.40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 23000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 120 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 0.70 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.14 | ||
| Static | 0.18 | ||
| Wear Factor 1 | 75.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 4.5 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 20 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 245 | °C | ASTM D648A |
| Vicat Softening Temperature | 255 | °C | ASTM D1525 2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | ||
| 3.20 mm | V-0 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLPLAST TC 2000C | UTEKSOL d.o.o. | SBS | SOLPLAST TC |
| Axiall PVC 14820 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| ESTASTIR HI 0508 V0 | Cossa Polimeri S.r.l. | PS (HIPS) | ESTASTIR |
| Kingfa FRHIPS-722 | Kingfa | PS (HIPS) | Kingfa |
| LNP™ THERMOCOMP™ IF003 compound | SABIC Innovative Plastics | Nylon 612 | LNP™ THERMOCOMP™ |
