Order Products : sales@su-jiao.com
Alpha PVC GW 3040-LT NATURAL LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 83mu97_Alpha-PVC-GW-3040-LT-NATURAL-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LEAD FREE, 90°C RATED, LOW TEMPERATURE, FLAME RETARDED CABLE JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 - 1.51 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 52 - 58 | ASTM D2240 | |
| Shaw D, 15 seconds | 35 - 41 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.610 mm | 15.9 | MPa | ASTM D412 |
| 1.91 mm | 14.5 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 290 | % | ASTM D412 |
| Fracture, 0.610mm | 270 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 113°C, 168 hr | 4.0 | % | UL Unspecified |
| 121°C, 168 hr | 9.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 113°C, 168 hr | 3.0 | % | UL Unspecified |
| 121°C, 168 hr | -17 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -25.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 40 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 166 | °C | |
| Cylinder Zone 3 Temp. | 171 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C | |
| Adapter Temperature | 177 | °C | |
| Melt Temperature | 177 - 185 | °C | |
| Die Temperature | 177 | °C |
| Extrusion instructions |
|---|
| It may be necessary to adjust barrel temp to attain the desired melt temperatureScrew Design: Standard PVC metering screw with a 3:1 compression ratio |
| Note Message | |
|---|---|
| 1 . | Thickness: 24 mil |
| 2 . | Thickness: 24 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRILOY® 200NH | Samyang Corporation | PC+ABS | TRILOY® |
| XYRON™ X332V | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| Delrin® 300CP NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| LUVOCOM® 1106-7843 | Lehmann & Voss & Co. | PEI | LUVOCOM® |
| PENTAMID A H TF20 natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
