Order Products : sales@su-jiao.com
Sevrene® 3000-70A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Sevrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 82b1oP_Sevrene-3000-70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sevrene® 3000-70A is a Thermoplastic Elastomer (TPE) material. It is available in North America for coextrusion, extrusion, or injection molding. Primary attribute of Sevrene® 3000-70A: Good Weather Resistance. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 72 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| Across Flow : 100% Strain | 2.40 | MPa | |
| Flow : 100% Strain | 3.30 | MPa | |
| Tensile Strength | ASTM D412 | ||
| Across Flow : Break | 7.90 | MPa | |
| Flow : Break | 5.90 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Across Flow : Break | 1000 | % | |
| Flow : Break | 660 | % | |
| Tear Strength | 33.9 | kN/m | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 72 hr) | 24 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (100°C, 72 hr) | 3.2 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 100°C, 72 hr) | 2.0 | ASTM D573 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 37 | mm/min | ISO 3795 |
| Fogging 1(38°C) | > 90 | % | SAE J1756 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| UV Protection 2 | 2.23 |
| Note Message | |
|---|---|
| 1 . | 6 hrs, (16 hr reading) |
| 2 . | SAE J1885, Interior Xenon Arc 1240 kJ/m², Delta E |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1405 | RTP Company | PESU | RTP |
| SynPlast™ NOTM-PPC | PolyOne Corporation | Tri (n-octyl) Trimellitate | SynPlast™ |
| Andur 8-6 APSLM/Curene® 3005 | Anderson Development Company | PUR-Ester/TDI | Andur |
| Delrin® 500TL NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| DOMAMID® 24 | DOMO Caproleuna GmbH | Nylon 6 | DOMAMID® |
