Order Products : sales@su-jiao.com
HIPTEN® 15080
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | HIP-PetroHemija |
| Trademark: | HIPTEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 8219PR_HIPTEN-15080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIPTEN® 15080 is low density polyethylene resin developed for extrusion coating. HIPTEN® 15080 has very good processability, high draw down, very low neck-in, outstanding adhesion to substrates and very low residual odour, what provide a good packaging material. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 38 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 7.00 | MPa | |
| Break | 11.0 | MPa | |
| Tensile Strain (Break) | 450 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ISO 306 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 290 to 330 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAN 110 | Trinseo | SAN | SAN |
| TECHNAMID® A A-SV25-0D | Poly Plastic | Nylon 66 | TECHNAMID® A |
| Altuglas® Luctor™ Medical Grade | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® Luctor™ |
| Fainplast PVC RST 708/UV | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| PETILEN I 668 | PETKIM Petrokimya Holding A.S. | HDPE | PETILEN |
