Order Products : sales@su-jiao.com

Arak HDPE BL2

Category:	HDPE , High Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	80gxqb_Arak-HDPE-BL2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

BL2 is a high density polyethylene grade, suitable for blow moulding applications.
Characteristics:

High rigidity.

Good flow ability.

Good impact strength.

Good stress cracking resistance.

Typical applications are:

Disinfectant bottles up to 2 litres capacity.

Containers up to 50 litres.

Petrol cans up to 5 litres.

* BL2 is suitable for food contact.

General Information
Features	Food Contact Acceptable Good Flow Good Impact Resistance High ESCR (Stress Crack Resist.) High Rigidity
Uses	Blow Molding Applications Bottles Containers
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.460	g/cm³	DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	1.0	g/10 min	DIN 53735
Environmental Stress-Cracking Resistance ¹(70°C)	> 10.0	hr	Internal Method

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength	> 7.0	kJ/m²	DIN 53453

Optical	Nominal Value	Unit	Test Method
Yellowness Index	< 4.0	YI	DIN 6167

Note Message
1 .	plax, 0.5 bar

Resin Grade	Manufacturer	Category	Trademark
PrimoFlo 73A-300	KMI Group Inc.	SEBS	PrimoFlo
ResMart Ultra SAN 9	ResMart	SAN	ResMart Ultra
ALCUDIA® LDPE 3235FG	REPSOL	LDPE	ALCUDIA® LDPE
Grilamid® LV-2H	EMS-GRIVORY	Nylon 12	Grilamid®
OnFlex™ S HF 90A-3S1988	PolyOne Corporation	TPE	OnFlex™