Order Products : sales@su-jiao.com
InnoPlus HD8100M
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7v2Vgf_InnoPlusHD8100M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus HD8100M is a natural color-high density polyethylene pipe grade which is certified as PE 100. InnoPlus HD8100M is bimodal resins exhibit excellent creep resistance and chemical resistance properties. This grade is suitable for high quality pressure pipes, produced by conventional pipe extrusion process. Typical Application : High pressure and High temperature pipes; Drinking water pipes, Industrial pipes and Sewer pipes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.25 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (25% Igepal, F50) | > 1000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 25.0 | MPa | ISO 527-2 |
| Fracture | 33.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 750 | % | ISO 527-2 |
| Apparent Bending Modulus | 735 | MPa | ASTM D747 |
| Flexural Modulus | 1080 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1 | 470 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 124 | °C | ASTM D1525 2 |
| Peak Melting Temperature | 128 | °C | ASTM D3418 |
| Oxidation Induction Time (200°C) | > 40 | min | ISO 11357-6 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 - 200 | °C | |
| Cylinder Zone 3 Temp. | 180 - 200 | °C | |
| Cylinder Zone 5 Temp. | 180 - 200 | °C | |
| Die Temperature | 190 - 220 | °C |
| Note Message | |
|---|---|
| 1 . | Non break |
| 2 . | 速率 A (50°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEFTEKHIM PP 1500J (T30G) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| NEOFLON™ AP-231SH | DAIKIN AMERICA, INC. | PFA | NEOFLON™ |
| NOVAPOL® HB-W555-A | NOVA Chemicals | HDPE | NOVAPOL® |
| 4MID® 9B22330 H | 4Plas | Nylon 6 | 4MID® |
| OTECH TPR OTR7000-Boot | OTECH Corporation | TPE | OTECH TPR |
