Order Products : sales@su-jiao.com
Osterlene® LLDO-1.0-.920
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7sdMXc_Osterlene-LLDO-1-0--920.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLDO-1.0-.920 has features for easy processability, high toughness and strength and excellent seal properties. LLDB-1.0-.920 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 1% Secant, MD | 175 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 10.0 | MPa | ASTM D882 |
| Fracture | 48.0 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 480 | % | ASTM D882 |
| Dart Drop Impact 1 | 270 | g | ASTM D1709A |
| Elmendorf Tear Strength - MD | 420 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 59 | ASTM D2457 | |
| Haze | 10 | % | ASTM D1003 |
| Additional Information |
|---|
| Product LLDO-1-920: Slip - 0, Antiblock - 0Product LLDO-1-920-SA: Slip - Medium, Antiblock - Medium |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Urochem 134 | Chemiplastica, Inc. | Urea Formald | Urochem |
| Multi-Flex® TPE TES 2403 SI1 BLK - PL23095 | Multibase, A Dow Corning Company | TES | Multi-Flex® TPE |
| DENKA ABS GR-2010G | Denka Company Limited | ABS | DENKA ABS |
| Enviramid® N2330MG15HL BK | Ravago Manufacturing Americas, LLC | Nylon 6 | Enviramid® |
| Delas 180 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PVC+NBR | Delas |
