Order Products : sales@su-jiao.com

Silopren® LSR 4030

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Silopren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7qxw6k_Silopren-LSR-4030.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Silopren LSR 4030 is a two-component liquid silicone rubber for injection moulding processes. Silopren LSR 4030 can be used to produce medical technical articles with high transparency and excellent rubber like properties.

Key Features and Benefits
Vulcanizates consisting of Silopren LSR 4030 are distinguished by the following properties:

high stability to ozone and ultraviolet light

neutral odour and taste

sterilisable with ethylen oxide, steam and gamma radiation

good transparency

high thermal stability

high recovery after puncture

easy pigmentable with the LSR Colour Pastes

Potential Applications
Because of the outstanding properties Silopren LSR 4030 is particularly suitable for the following elastomeric articles:

sealing elements,

O-rings, diaphragms,

bellows, catheters,

baby teats,

respiratory devices,

vibration dampers,

mats,

parts for medical technical equipments.

General Information
Features	Ethylene Oxide Sterilizable Fast Cure Fast Molding Cycle Good Colorability Good Mold Release Good Thermal Stability Good UV Resistance High Clarity Low to No Odor Low to No Taste Ozone Resistant Radiation Sterilizable Steam Sterilizable Vibration Damping
Uses	Diaphragms Medical/Healthcare Applications Seals
Agency Ratings	BfR Food Contact, Unspecified Rating FDA 21 CFR 177.2600 ISO 10993 USP Class VI
Appearance	Clear/Transparent
Forms	Liquid
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.10	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	31		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	8.00	MPa	DIN 53504
Tensile Elongation (Break)	800	%	DIN 53504
Tear Strength ¹	18.0	kN/m	ASTM D624
Compression Set (175°C, 22 hr)	15	%	DIN 53517

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit	Test Method
Vulcanization (175°C)	10.0	min

Uncured Properties	Nominal Value	Unit	Test Method
Color
-- ²	Translucent
-- ³	Translucent
Viscosity			DIN 53018
20°C ⁴	350	Pa·s
20°C ⁵	350	Pa·s
Pot Life (20°C)	4300	min

Note Message
1 .	Die B
2 .	Part B
3 .	Part A
4 .	Part B
5 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Capran® 526	Honeywell	Nylon, Unspecified	Capran®
Evoprene™ HP 3702	AlphaGary	SBC	Evoprene™ HP
HiFill® PA6/6 GF33 IM HS L	Techmer Engineered Solutions	Nylon 66	HiFill®
Thermec N™ 4314R50H	Technical Polymers, LLC	PPA	Thermec N™
Durethan® DP 2801 000000	LANXESS Corporation	Nylon 66	Durethan®