Plenco 04300 (Injection) Datasheet,Phenolic,Plastics Engineering Co.-SHANGHAI SUSHENG

Message
PLENCO 04300 is a heat resistant, mineral filled phenolic molding compound offering optimum cure characteristics and excellent dimensional stability. It is formulated for wiring devices and electrical control applications. Type ASTM 5948 CFG, and UL recognized under component file E40654. 04300 is available in black.

General Information
Filler / Reinforcement	Mineral filler
Features	Good dimensional stability Fast curing Heat resistance, high
Agency Ratings	ASTM D 5948, Type CFG
UL File Number	E40654
Appearance	Black
Forms	Particles
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.54	g/cm³	ASTM D792
Apparent Density	0.66	g/cm³	ASTM D1895
Molding Shrinkage - Flow	0.76	%	ASTM D955
Water Absorption (24 hr)	0.22	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (E-Scale)	77		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	9920	MPa	ASTM D638
Tensile Strength	53.0	MPa	ASTM D638
Tensile Elongation (Break)	0.70	%	ASTM D638
Flexural Modulus	8600	MPa	ASTM D790
Flexural Strength	85.0	MPa	ASTM D790
Compressive Strength	162	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	17.8	J/m	ASTM D256
Notched Izod Impact	17	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	173	°C	ASTM D648
Continuous Use Temperature	202	°C	ASTM D794
CLTE - Flow	4.6E-5	cm/cm/°C	ASTM E831
Thermal Conductivity (100°C)	0.54	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	9.7E+11	ohms·cm	ASTM D257
Dielectric Strength			ASTM D149
-- ¹	11	kV/mm	ASTM D149
-- ²	6.6	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	5.50		ASTM D150
Dissipation Factor (1 MHz)	0.058		ASTM D150
Arc Resistance	180	sec	ASTM D495
Comparative Tracking Index (CTI)	175	V	UL 746

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm)	V-0		UL 94
Oxygen Index	31	%	ASTM D2863

Additional Information
The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.25%Heat Resistance, ASTM D794: 202°CDrop Ball Impact, PLENCO Method: 97 J/m

Additional Information

The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.25%Heat Resistance, ASTM D794: 202°CDrop Ball Impact, PLENCO Method: 97 J/m

Injection	Nominal Value	Unit
Suggested Shot Size	20 - 80	%
Rear Temperature	66.0 - 82.0	°C
Front Temperature	82.0 - 99.0	°C
Processing (Melt) Temp	104 - 115	°C
Mold Temperature	165 - 182	°C
Injection Pressure	6.20 - 11.0	MPa
Back Pressure	0.300	MPa
Screw Speed	< 60	rpm
Cushion	3.00	mm

Injection instructions
Injection Time: 3-8 sec

Note Message
1 .	Method A (short time)
2 .	Method B (step by step)

Category:	Phenolic , Phenolic
Manufacturer:	Plastics Engineering Co.
Trademark:	Plenco
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7oBQhi_Plenco-04300-Injection-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Novodur® P2MC	Styrolution	ABS	Novodur®
Dow ENDURANCE™ HFDA-0693 BK	The Dow Chemical Company	TP, Unspecified	Dow ENDURANCE™
GPPC ABS D-450	GPPC Chemical Co., Ltd.	ABS	GPPC ABS
Geon™ Vinyl Rigid Molding M3000	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Molding
ENSOFT SO-160-60A	ENPLAST, a Ravago Group Company	TPE	ENSOFT