Glastic® 1423 Datasheet,Polyester, TS,Bulk Molding Compounds, Inc.-SHANGHAI SUSHENG

Message
Grade 1423 is a wear-resistant electrical grade material used in applications where there are moving parts. Best anti-wear properties are exhibited when used in conjunction with mating parts molded from Glastic® Grade 1412 materials. Has moderately high physical strengths combined with excellent electrical properties.

General Information
Filler / Reinforcement	Glass fiber reinforced material
Features	Insulation Good electrical performance Good wear resistance Flame retardancy
Uses	Electrical/Electronic Applications
Appearance	White Black Available colors
Forms	BMC-Block Molding Compound
Processing Method	Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.84	g/cm³	ASTM D792
Water Absorption (24 hr)	0.18	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Compression Molded)	12400	MPa	ASTM D638
Tensile Strength (Yield, Compression Molded)	47.3	MPa	ASTM D638
Flexural Modulus (Compression Molded)	9650	MPa	ASTM D790
Flexural Strength (Compression Molded)	112	MPa	ASTM D790
Compressive Strength	135	MPa	ASTM D695
Shear Strength	40.8	MPa	ASTM D732

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	210	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded)	260	°C	ASTM D648
RTI Elec	54.4	°C	UL 746
RTI	54.4	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.8E+15	ohms	ASTM D257
Dielectric Strength ¹	17	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	5.70 5.30		ASTM D150
1 MHz	4.40 4.70		ASTM D150
Dissipation Factor			ASTM D150
60 Hz	0.037 0.017		ASTM D150
1 MHz	0.015 0.13		ASTM D150
Arc Resistance	189	sec	ASTM D495

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94

Additional Information
Permittivity, ASTM D150, 60 Hz, Condition A: 5.3Permittivity, ASTM D150, 60 Hz, Condition D: 5.7Permittivity, ASTM D150, 1 MHz, Condition A: 4.4Permittivity, ASTM D150, 1 MHz, Condition D: 4.7Insulation Resistance, ASTM D257, Condition A: 179 Ohm x 10e13Insulation Resistance, ASTM D257, Condition C: 1.8 Ohm x 10e13Track Resistance, ASTM D2303: 1510 minutesDissipation Factor, ASTM D150, 60 Hz, Condition A: 0.017Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.037Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.015Dissipation Factor, ASTM D150, 1 MHz, Condition D: 0.134

Additional Information

Permittivity, ASTM D150, 60 Hz, Condition A: 5.3Permittivity, ASTM D150, 60 Hz, Condition D: 5.7Permittivity, ASTM D150, 1 MHz, Condition A: 4.4Permittivity, ASTM D150, 1 MHz, Condition D: 4.7Insulation Resistance, ASTM D257, Condition A: 179 Ohm x 10e13Insulation Resistance, ASTM D257, Condition C: 1.8 Ohm x 10e13Track Resistance, ASTM D2303: 1510 minutesDissipation Factor, ASTM D150, 60 Hz, Condition A: 0.017Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.037Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.015Dissipation Factor, ASTM D150, 1 MHz, Condition D: 0.134

Note Message
1 .	Method A (short time)

Category:	Polyester, TS , Thermoset Polyester
Manufacturer:	Bulk Molding Compounds, Inc.
Trademark:	Glastic®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7mggvf_Glastic-1423.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene F52-01	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
Telcar® TL-2565F	Teknor Apex Company	TPE	Telcar®
Cellidor CP 310-10	ALBIS PLASTIC GmbH	CAP	Cellidor
Garaflex™ E 4362-A1 NAT LCF	AlphaGary	TPE	Garaflex™ E
Karina BLACK PVC COMPOUND -E 75850D48/ 1-B-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina