Order Products : sales@su-jiao.com
Diamond PC 1229M
| Category: | PC , Polycarbonate |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Diamond PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7lUQPI_Diamond-PC-1229M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Diamond PC 1229M is a Polycarbonate (PC) product. It can be processed by injection molding and is available in North America. Typical application: Medical/Healthcare. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(300°C/1.2 kg) | 23 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2(23°C, Injection Molded) | 2240 | MPa | ASTM D638 |
| Tensile Strength 3(Yield, 23°C, Injection Molded) | 63.8 | MPa | ASTM D638 |
| Tensile Elongation 4 | ASTM D638 | ||
| Yield, 23°C, Injection Molded | 6.1 | % | |
| Break, 23°C, Injection Molded | 190 | % | |
| Flexural Modulus (23°C, Injection Molded) | 2190 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 750 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Vicat Softening Temperature | 143 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 89.0 | % | ASTM D1003 |
| Haze | < 0.80 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Drying Time, Maximum | 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 229 to 257 | °C | |
| Middle Temperature | 266 to 288 | °C | |
| Front Temperature | 277 to 299 | °C | |
| Nozzle Temperature | 266 to 277 | °C | |
| Processing (Melt) Temp | 280 to 320 | °C | |
| Mold Temperature | 65.6 to 104 | °C | |
| Injection Pressure | 68.9 to 138 | MPa | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPV 4785B40 | Teknor Apex Company | TPV | Sarlink® TPV |
| WONDERLITE® PC-122U | CHI MEI CORPORATION | PC | WONDERLITE® |
| Bynel® 4140 | DuPont Packaging & Industrial Polymers | LLDPE | Bynel® |
| Complet® LGF30-PA6 | PlastiComp, Inc. | Nylon 6 | Complet® |
| EPALINE 386A55 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPALINE |
