Order Products : sales@su-jiao.com
Marlex® HHM 4903
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7kpD1H_Marlex-HHM-4903.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® HHM 4903 is a High Density Polyethylene material. It is available in Latin America or North America for blow molding, extrusion, or sheet extrusion. Important attributes of Marlex® HHM 4903 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.29 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 26.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 600 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 1170 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8716-75 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Vytaflex® 10 | Smooth-On, Inc | PUR, Unspecified | Vytaflex® |
| Westlake LDPE EP413 | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| Laprene® 830000546 | SO.F.TER. SPA | SEBS | Laprene® |
| OpteSTAT™ MB-PK 8000 | Ovation Polymers Inc. | PEEK | OpteSTAT™ |
