| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7iBsBs_WPP-PP-PRC25MG3-Black.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| Properties shown below for this filled blend are typical for a 30% mica and glass fiber reinforced polypropylene homopolymer. This product satisfies many application needs. Special compounds are available. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| Yield | 64.0 | MPa | ISO 527-2/5 |
| Yield | 70.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 8.0 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 5200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179 |
| Notched Izod Impact Strength | ISO 180 | ||
| -40°C | 4.5 | kJ/m² | |
| 23°C | 6.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 157 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 142 | °C | ISO 75-2/A |
| 1.8 MPa, Unannealed | 139 | °C | ISO 75-2/Af |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1302 | RTP Company | PPS | RTP |
| VENYL VG200 - 8716 | AD majoris | Nylon 66/6 | VENYL |
| VESTAMID® Care ME55-B | Evonik Industries AG | PEBA-Ether | VESTAMID® Care |
| Avalon 69 | Greene, Tweed & Co. | PTFE | Avalon |
| Infino VB-5400G | SAMSUNG SDI CO., LTD. | PBT | Infino |