Order Products : sales@su-jiao.com
Arak LLDPE LL0410AA / LL0410KJ
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Shazand (Arak) Petrochemical Corporation |
| Trademark: | Arak LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7hkGdH_Arak-LLDPE-LL0410AA-LL0410KJ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LL0410AA & LL0410KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL0410AA & LL0410KJ are suitable for thin and stiff blown films because of their good draw down properties. LL0410AA also can be used for applications such as carrier bags and garment wraps. LL0410KJ contains slip and anti-blocking agents for better opening properties. Recommended melt temperature for extrusion is about 180°C - 225°C. LL0410AA & LL0410KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight. * LL0410AA & LL0410KJ are suitable for food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 to 0.928 | g/cm³ | ASTM D2838 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 to 1.1 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 12.0 | MPa | |
| TD : Yield | 13.0 | MPa | |
| MD : Break | 42.0 | MPa | |
| TD : Break | 33.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 650 | % | |
| TD : Break | 800 | % | |
| Dart Drop Impact | 90 | g | ASTM D1709 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 48 | ASTM D2457 | |
| Haze | 13 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 to 225 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205H HS | RTP Company | Nylon 66 | RTP |
| Shinko-Lac® ASA S511 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| Toyolac® 884-X01 | Toray Resin Company | ABS | Toyolac® |
| XANTAR® MX 1001 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| ADMER™ QF551A | Mitsui Chemicals America, Inc. | PP, Unspecified | ADMER™ |
