Order Products : sales@su-jiao.com
TAIRILITE AC3710
| Category: | PC , Polycarbonate |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAIRILITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7heser_TAIRILITE-AC3710.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FCFC PC resin AC3710 meets the requirements of UL, SGS and the certificates of environmental protection. |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.20 | g/cm³ | ASTM D792 |
| 23°C | 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 25 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| Class R, 23°C | 122 | ASTM D785 | |
| R scale, 23°C | 122 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| 23°C | 58.8 | MPa | ASTM D638 |
| 23°C | 59.0 | MPa | ISO 527-2 |
| Flexural Modulus (23°C) | 2250 | MPa | ASTM D790, ISO 178 |
| Flexural Strength (23°C) | 98.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C, 3.18 mm) | 640 | J/m | ISO 180, ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 110 | °C | ASTM D648, ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.800 mm, All Colors) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 130 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Mold Temperature | 80.0 - 100 | °C | |
| Injection Pressure | 4.90 - 7.85 | MPa |
| Injection instructions |
|---|
| Screw Temp: 260 to 290°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® ForTii™ F12 | DSM Engineering Plastics | Nylon 4T | Stanyl® ForTii™ |
| NILAMID® A3 H CF30 | Nilit Plastics | Nylon 66 | NILAMID® |
| Arnite® TV4 260 SN | DSM Engineering Plastics | PBT | Arnite® |
| Ecomass® 1005ZD96 | Ecomass Technologies | Nylon Copolymer | Ecomass® |
| ISORENE™ A8-1001 | SABIC Innovative Plastics Europe | TPE | ISORENE™ |
