Order Products : sales@su-jiao.com
INEOS Wire & Cable BPD3801
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS Wire & Cable |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7gsZtw_INEOS-Wire-Cable-BPD3801.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BPD3801 is a polyethylene copolymer containing hexene-1 as the comonomer produced with a metallocene catalyst. BPD3801 represents an interesting balance of properties for Wire & Cable applications. When compounded with suitable additives, is designed for use in silane crosslinking processes (Monosil ® ). It has been developed for LV insulation or jacketing applications. Benefits and Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ISO 1872 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 20.0 | MPa | IEC 811-1-1 |
| Tensile Strain (Break) | > 300 | % | IEC 811-1-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset | 60 | % | IEC 60811-2-1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Constant (50 Hz) | 2.30 | ASTM D150 | |
| Dissipation Factor (50 Hz) | < 4.0E-3 | ASTM D150 |
| Additional Information |
|---|
| BPD3801 when grafted in the laboratory with 1.1 % of a suitable silane/peroxide mixture and 0.05 % of a tin condensation catalyst, typically gives the following results on a 1.5 mm² cable after curing 4h in water at 80 °C. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Cylinder Zone 5 Temp. | 190 | °C | |
| Melt Temperature | 225 - 235 | °C | |
| Die Temperature | 270 | °C |
| Extrusion instructions |
|---|
| Cylinder zone 6 temp: 200°CCylinder zone 7 temp: 210°CHead Temperatures: 220-220-230°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN501G50AH | RJM International, Inc. | Nylon 6 | RJM |
| NORYL™ PX9406K resin | SABIC Innovative Plastics Asia Pacific | PPE+PS | NORYL™ |
| APEX® 3301-75NT | Teknor Apex Company | PVC, Flexible | APEX® |
| FM® 209-1 | Cytec Industries Inc. | Adhesive | FM® |
| SD POLYCA™ SD2221W | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
