Order Products : sales@su-jiao.com
ARMAMID® PA 6-1UP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Poly Plastic |
| Trademark: | ARMAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7gGLU0_ARMAMID-PA-6-1UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ARMAMID® PA 6-1UP is a Polyamide 6 (Nylon 6) product. It is available in Europe. Typical application: Film. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.11 | g/cm³ | |
| Molding Shrinkage | 1.5 to 2.5 | % | |
| Water Absorption | |||
| Saturation, 23°C | 8.8 | % | |
| Equilibrium, 23°C, 50% RH | 3.2 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 57.0 | MPa | |
| Tensile Strain (Break) | 30 | % | |
| Flexural Modulus (23°C) | 2000 | MPa | |
| Flexural Stress | 67.0 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -40°C | 12 | kJ/m² | |
| 20°C | 17 | kJ/m² | |
| Charpy Unnotched Impact Strength (-40°C) | No Break |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 125 | °C | |
| 1.8 MPa, Unannealed | 55.0 | °C | |
| Melting Temperature | 215 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | 1.0E+13 | ohms | |
| -- 2 | 1.0E+15 | ohms | |
| Volume Resistivity | |||
| -- 3 | 1.0E+17 | ohms·cm | |
| -- 4 | 1.0E+15 | ohms·cm | |
| Electric Strength | 22 to 24 | kV/mm |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Dry |
| 3 . | Wet |
| 4 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 340 No.67 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Fainplast PVC PH 70/AT | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Ebalta AH 120 / TGL | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| Haysite Plastics H515 | Haysite Reinforced Plastics | Polyester, TS | Haysite Plastics |
| Polifor® 8 GB/20 NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
