Order Products : sales@su-jiao.com
Synthos EPS® 0308S/CZ
| Category: | PS (EPS) , Expanded Polystyrene |
| Manufacturer: | Synthos S.A. |
| Trademark: | Synthos EPS® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7cemqC_Synthos-EPS-0308S-CZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Synthos EPS®/CZ types 0308S, 0513S, 0814S and 1020S are expandable polystyrene (EPS) formed by spherical polystyrene particles that contains a hydrocarbon blowing agent. The material is surface treated against gluing during processing and the formation of electrostatic charge. Synthos EPS® 0308S/CZ (Koplen 0308S) is mainly used for production of shaped parts with wall thickness less than 10 mm (e.g. shipping packaging for glass and electrical goods). |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density 1 | 0.03 to 0.06 | g/cm³ | Internal Method |
| Moisture Content | < 10000 | ppm | Internal Method |
| Particle Size - >95% between | 315 to 800 | µm | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Blowing Agent | < 7.0 | wt% | Internal Method |
| Note Message | |
|---|---|
| 1 . | The typical bulk density indicates values obtained during single-step pre-foaming on continuous pre-foaming devicesLower values of bulk density can be achieved only after multiple pre-expansion. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULABLEND® (ASA/PA) M/MW NC 100 | A. Schulman Europe | ASA+Nylon | SCHULABLEND® |
| Synres-Almoco SI 4554 | Synres-Almoco BV | Silicone | Synres-Almoco |
| Elastron® G G201.A67.N | Elastron USA, Inc. | SEBS | Elastron® G |
| KIBITON® TPE PB-575 | CHI MEI CORPORATION | TPE | KIBITON® TPE |
| ULTEM™ 9085 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
