Order Products : sales@su-jiao.com

ALCUDIA® HDPE 6080 IUV

Category:	HDPE , High Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7auyeS_ALCUDIA-HDPE-6080-IUV.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® 6080IUV is a high density polyethylene grade of high fluidity intended for those injection moulding applications in which an excellent balance of mechanical properties and good flow properties are required. Technical benefits this grade offers are: Easy mould filling and quick release from the mould Good mechanical and physical properties UV-light protection TYPICAL APPLICATIONS Due to its good balance of mechanical and flow properties, ALCUDIA® 6080IUV is particularly intended for application in which good mechanical properties and weathering resistance are required: Crates, boxes and storing cases Rigid and industrial packaging Recommended melt temperature range from 180 to 240°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® 6080IUV is a high density polyethylene grade of high fluidity intended for those injection moulding applications in which an excellent balance of mechanical properties and good flow properties are required. Technical benefits this grade offers are:

Easy mould filling and quick release from the mould

Good mechanical and physical properties

UV-light protection

TYPICAL APPLICATIONS
Due to its good balance of mechanical and flow properties, ALCUDIA® 6080IUV is particularly intended for application in which good mechanical properties and weathering resistance are required:

Crates, boxes and storing cases

Rigid and industrial packaging

Recommended melt temperature range from 180 to 240°C. Processing conditions should be optimised for each production line.

General Information
Additive	UV Stabilizer
Features	Food Contact Acceptable Good Moldability High Flow
Uses	Crates Industrial Applications Packaging
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.960	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	62		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	27.0	MPa	ISO 527-2
Flexural Modulus	1300	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	128	°C	ISO 306/A

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 to 240	°C

Resin Grade	Manufacturer	Category	Trademark
Qenos PE HDF895	Qenos Pty Ltd	HDPE, MMW	Qenos PE
Geon™ Vinyl Rigid Extrusion L6607	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
Huafon HF-1265AP	Huafon Group Co., Ltd.	TPU-Polyester	Huafon
Latamid 6 H2 G/30-V2HF	LATI S.p.A.	Nylon 6	Latamid
Lushan EF-3	Guangzhou Lushan New Materials Co., Ltd	Polyolefin, Unspecified	Lushan