Order Products : sales@su-jiao.com
ENVIROPLAS® ENV13-NC170
| Category: | PC , Polycarbonate |
| Manufacturer: | ENVIROPLAS®, Inc. |
| Trademark: | ENVIROPLAS® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7a9VgQ_ENVIROPLAS-ENV13-NC170.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Injection Molding Grade, Foamable, 10% Fiberglass Reinforced, Black, Flame Retardant, w/Mold Release, RoHS Compliant Contact Enviroplas Regarding UL Recognized Versions Of This Product. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 7.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D955 |
| Ash Content | 10 | % | ASTM D5630 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 62.1 | MPa | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 142 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | Internal Method | ||
| 2.40 mm | V-0 5VA | ||
| 3.00 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 282 to 304 | °C | |
| Middle Temperature | 293 to 316 | °C | |
| Front Temperature | 288 to 316 | °C | |
| Nozzle Temperature | 293 to 321 | °C | |
| Mold Temperature | 79.4 to 110 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tectron H2266 | TECTRON Systems Pte Ltd | TPV | Tectron |
| SolVin 372HA | INOVYN | PVC, Unspecified | SolVin |
| MonoSol® AF A200 | MonoSol, LLC | PVOH | MonoSol® |
| TROGAMID® T T5000 | Evonik Industries AG | Nylon 6/3T | TROGAMID® T |
| Nypol® PA A3 Z40 HS NTLA010 NR457 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
