Order Products : sales@su-jiao.com

NuSil MED-4211

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7a8LLI_NuSil-MED-4211.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: FLOWABLE

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: FLOWABLE

General Information
Features	Good Flow Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0
Post Cure Time (150°C)	1.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.09	g/cm³
Viscosity
-- ¹	1.6	Pa·s
-- ²	110	Pa·s
Curing Time (150°C)	0.050	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	25
Tensile Strength	4.65	MPa
Tensile Elongation at Break	530	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
NOVALAC RX®866	Vyncolit N.V.	Phenolic	NOVALAC
Fainplast PVC RE 330	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
Flexalloy® 9606-65	Teknor Apex Company	PVC Elastomer	Flexalloy®
Lifoflex® UVX 50.01 B038-4	ELASTO	TPE	Lifoflex®
LNP™ THERMOCOMP™ RF0069SZ compound	SABIC Innovative Plastics Asia Pacific	Nylon 66	LNP™ THERMOCOMP™