Order Products : sales@su-jiao.com
Dynaglide® DW 645
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | DeWAL Industries |
| Trademark: | Dynaglide® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7ZDhR3_Dynaglide-DW-645.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dynaglide D/W 645 is a filled PTFE material, pigmented green, specifically designed to run against aluminum. DeWAL can produce this in a thickness range from 0.015" to 0.064". D/W can be used in both bearing and seal applications. This product exhibits very low fricton and wear properties running against soft mating surfaces like aluminum. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 2.11 | g/cm³ | |
| Thickness | 0.4 to 1.6 | µm |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Wear Factor | 11.5 | ASTM D3702 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Core ID | 7.62 | cm | |
| Width | 12.7 to 305 | mm |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD (Yield) | 13.8 | MPa | ASTM D1457 |
| Tensile Elongation - MD (Break) | 230 | % | ASTM D1457 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 3201-60NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Fluoroplex I 10 - GML | UNIFLON | PTFE | Fluoroplex |
| Eastar™ DN010 | Eastman Chemical Company | Copolyester | Eastar™ |
| Edgetek™ NL-20GF/000 BLACK | PolyOne Corporation | Nylon 612 | Edgetek™ |
| Keldax® 6868 | DuPont Packaging & Industrial Polymers | Ethylene Copolymer | Keldax® |
