Order Products : sales@su-jiao.com
CERTENE™ PRM-35ARN
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7YHgE4_CERTENE-PRM-35ARN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRM-35ARN is a certified prime grade Injection Molding copolymer designed for applications requiring excellent balance of high stiffness and good impact strength. PRM-35ARN is formulated with Antistatic for protection against dust build-up, features Controlled Rheology for high quality straight flat surfaces of moldings, and advantages of Nucleation: faster mold set-up, reduced warpage and sink marks, freedom from stress whitening, improved tensiles and stiffness. PRM-35ARN typical applications include thin-walled food containers, margarine tubs, yogurt and ice-cream pots, Video cassette boxes, toys, flower pots, and promotional drinking cups. PRM-35ARN complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1520 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 148 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mediprene® 500400M | ELASTO | SEBS | Mediprene® |
| Tecnoflon® PFR 94 | Solvay Specialty Polymers | Perfluoroelastomer | Tecnoflon® PFR |
| NYLAFORCE® dynamic B 60 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 6 | NYLAFORCE® dynamic |
| Alkatuff® LL711UV | Qenos Pty Ltd | LLDPE | Alkatuff® |
| APEX® 3201-55NT | Teknor Apex Company | PVC, Flexible | APEX® |
