Order Products : sales@su-jiao.com
Star L POM D11
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Star L |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7Y0iLd_Star-L-POM-D11.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Star L POM D11 is a Silicone Oil Lubricated, POM Copolymer Injection Molding Resin |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (4.00 mm) | 2.7 - 3.3 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 56.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 45 | % | ISO 527-2 |
| Flexural Modulus | 2200 | MPa | ISO 178 |
| Flexural Stress | 68.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(23°C) | 13 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(23°C) | 120 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 3(0.45 MPa, Unannealed, 100 mm Span) | 149 | °C | ISO 75-2/Be |
| Melting Temperature (DSC) | 170 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 180 - 190 | °C | |
| Middle Temperature | 180 - 190 | °C | |
| Front Temperature | 180 - 200 | °C | |
| Processing (Melt) Temp | 180 - 200 | °C | |
| Mold Temperature | 60.0 - 100 | °C |
| Injection instructions |
|---|
| Screw Speed: Moderate |
| Note Message | |
|---|---|
| 1 . | 80*10*4 |
| 2 . | 80*10*4 |
| 3 . | 120*10*4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3653T | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TECOLITE KM-350(G) | KYOCERA Chemical Corporation | Phenolic | TECOLITE |
| TEKNIFLEX® VAV5805 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PCTFE/PVC | TEKNIFLEX® |
| Hanwha Total PP TB81W | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| EPAMOULD 295A10T | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
