Order Products : sales@su-jiao.com
SCLAIR® 2908
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | NOVA Chemicals |
| Trademark: | SCLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7Wtawv_SCLAIR-2908.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SCLAIR® 2908 is a High Density Polyethylene material. It is available in North America for injection molding. Important attributes of SCLAIR® 2908 are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.961 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | < 10.0 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 29.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 1200 | % | ASTM D638 |
| Flexural Modulus | 1280 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 129 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PP-B B 2020/550 GF20 | ALBIS PLASTIC GmbH | PP Copolymer | ALTECH® PP-B |
| Flontech® FT-T48-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Elastron® G G300.A55.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Hostacom TRC 787N E1 | LyondellBasell Industries | PP, Unspecified | Hostacom |
| Hyundai EP Adhesives RE140R/1002 | HYUNDAI EP Co., Ltd. | PP, Unspecified | Hyundai EP Adhesives |
