Order Products : sales@su-jiao.com
CERTENE™ LDF-722F
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7Whq9x_CERTENE-LDF-722F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LDF-722F is a certified prime resin specially designed for production of high drawdown thin gauged high clarity Blown films. LDF-722F features excellent combination of easy processability at high extrusion rates and very good balance of film mechanical properties. Films display very good color stability and superior heat seal performance. LDF-722F applications include films for garment laundry and dry cleaning, banana tree shroud bags, and produce bags. Maximum recommended film drawdown is 0.5 mils. LDF-722F contains high slip and high antiblock. LDF-722F complies with FDA regulation 21CFR 177.1520 (c) 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 25 µm | 228 | MPa | ASTM D882 |
| 1% secant, TD : 25 µm | 276 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 9.65 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 8.96 | MPa | ASTM D882 |
| MD : Break, 25 µm | 20.7 | MPa | ASTM D882 |
| TD : Break, 25 µm | 14.5 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 150 | % | ASTM D882 |
| TD : Break, 25 µm | 500 | % | ASTM D882 |
| Dart Drop Impact 1(25 µm) | 30 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 150 | g | ASTM D1922 |
| TD : 25 µm | 110 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.4 µm, Blown Film) | 70 | ASTM D2457 | |
| Haze (25.4 µm, Blown Film) | 6.5 | % | ASTM D1003 |
| Additional Information |
|---|
| Film Specimen: 1.0 mils (25 µm) film, melt temperature 300-340°F (150-170°C), blow-up-ratio 2.5 :1 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 208K BLACK 10N-L | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Solef® 6008 | Solvay Specialty Polymers | PVDF | Solef® |
| Alathon® M4855 | LyondellBasell Industries | HDPE | Alathon® |
| LUVOCOM® 1-8068/GY-1 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Hostacom TRC 411N G82732 | LyondellBasell Industries | PP, Unspecified | Hostacom |
