Order Products : sales@su-jiao.com
Asaprene™ T-420
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Asaprene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7VuoHc_Asaprene-T-420.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relatively low styrene content, for enhanced adhesive performance in pressure-sensitive and other adhesives. It is supplied in crumb form. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 1.1 | g/10 min | |
| 200°C/5.0 kg | 6.5 | g/10 min | |
| Butadiene Content | 70 | % | Internal Method |
| Styrene Content | 30 | % | Internal Method |
| Viscosity - 25% solution in toluene | 1.20 | Pa·s | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 2.00 mm, Compression Molded) | 75 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain, 2.00 mm) | 2.90 | MPa | ISO 37 |
| Tensile Stress (Break, 2.00 mm) | 27.0 | MPa | ISO 37 |
| Tensile Elongation (Break, 2.00 mm) | 900 | % | ISO 37 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® A3 ICF 20 S1 black (5057) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Gallonprene® GP520-9005 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Gravi-Tech™ X ET6000-0581 MG Black | PolyOne Corporation | Nylon 6 | Gravi-Tech™ |
| Kuraray Poval® PVA 140H | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
| POLYFLON™ D-2C | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
