Tecnoflon® VPL 85730 / VPL 45730

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	7TUMzK_Tecnoflon-VPL-85730-VPL-45730.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Tecnoflon® VPL 85730 and VPL 45730 are a brand new generation of very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10 = -30°C). Furthermore, they show an improved chemical resistance if compared to Tecnoflon® PL grades with similar TR10. Like all other Tecnoflon® peroxide curable grades, they exhibit excellent processability; moreover they need very short post-curing cycles. Some of the basic properties of Tecnoflon® VPL 85730 and VPL 45730 are: Outstanding low temperature flexibility Excellent chemical resistance Low post cure Superior mold flow Lack of mold fouling Excellent mold release Tecnoflon® VPL 85730 and VPL 45730 can be used for compression, injection, injection-compression and transfer molding of Orings, gaskets and seals. Tecnoflon® VPL 85730 and VPL 45730 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. These materials can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

Message

Tecnoflon® VPL 85730 and VPL 45730 are a brand new generation of very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10 = -30°C). Furthermore, they show an improved chemical resistance if compared to Tecnoflon® PL grades with similar TR10.
Like all other Tecnoflon® peroxide curable grades, they exhibit excellent processability; moreover they need very short post-curing cycles.

Some of the basic properties of Tecnoflon® VPL 85730 and VPL 45730 are:

Outstanding low temperature flexibility

Excellent chemical resistance

Low post cure

Superior mold flow

Lack of mold fouling

Excellent mold release

Tecnoflon® VPL 85730 and VPL 45730 can be used for compression, injection, injection-compression and transfer molding of Orings, gaskets and seals. Tecnoflon® VPL 85730 and VPL 45730 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
These materials can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

General Information
Features	Fast Cure Good Chemical Resistance Good Flow Good Mold Release Good Processability Low Temperature Flexibility
Uses	Belts/Belt Repair Blending Gaskets Hose Low Temperature Applications Profiles Seals Sheet
Appearance	Translucent
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity
ML 1+10, 121°C ¹	45	MU
ML 1+10, 121°C ²	25	MU
Fluorine Content ³	67	%

Note Message
1 .	Raw polymer: VPL 85730
2 .	Raw polymer: VPL 45730
3 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Vyncolit® RX®3-1-501N	Vyncolit N.V.	DAP	Vyncolit®
UTTAP ES 10559	Ovation Polymers Inc.	PC Alloy	UTTAP
Eltex® PF6012AA	INEOS Olefins & Polymers Europe	mLLDPE	Eltex®
KRYSTALGRAN™ PE193-100	Huntsman Corporation	PUR-Eth,aliphat	KRYSTALGRAN™
INLUBE PPSCF10TF10GP10	Infinity Compounding Corp.	PPS	INLUBE