Order Products : sales@su-jiao.com
Sumikon® PM-6600
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7ObCzl_SumikonPM6600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON® PM-6600 Type Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.79 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.22 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.060 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 110 | MPa | JIS K6911 |
| Flexural Modulus | 15300 | MPa | JIS K6911 |
| Flexural Strength | 210 | MPa | JIS K6911 |
| Compressive Strength | 260 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.1 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 208 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 16 | kV/mm | JIS K6911 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 1.0E+12 | ohms | JIS K6911 |
| -- 3 | 5.0E+11 | ohms | JIS K6911 |
| Note Message | |
|---|---|
| 1 . | Method B (step by step) |
| 2 . | As molded |
| 3 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MORETEC™ 0248Z | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| ULTEM™ SF2360 resin | SABIC Innovative Plastics Asia Pacific | PEI | ULTEM™ |
| Badamid® PA612 GF50 | Bada AG | Nylon 612 | Badamid® |
| HiFill® TPU/E 0140 | Techmer Engineered Solutions | TPU, Unspecified | HiFill® |
| HiFill® PA6/6 GF14 IM HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
