Order Products : sales@su-jiao.com
Petrothene® GA502119
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7NMGgT_PetrotheneGA502119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The Petrothene GA502 series of resins are pelletized linear low density polyethylenes for applications requiring excellent drawdown and toughness. These pelletized products offer excellent additive homogeneity, require no transfer equipment modification and facilitate clean and safe storage and handling. They can be used in either blown or cast film extrusion. GA502024 is formulated with higher antioxidant levels for use in cast film. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D638 | ||
| 1% secant, MD : 38 µm | 221 | MPa | ASTM D638 |
| 1% secant, TD : 38 µm | 248 | MPa | ASTM D638 |
| Tensile Strength | ASTM D882 | ||
| MD : Fracture, 38 µm | 33.8 | MPa | ASTM D882 |
| TD : Fracture, 38 µm | 24.8 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture, 38 µm | 750 | % | ASTM D882 |
| TD : Fracture, 38 µm | 800 | % | ASTM D882 |
| Dart Drop Impact (38 µm) | 120 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 170 | g | ASTM D1922 |
| TD : 38 µm | 400 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Gloss (45°, 38.1 µm) | 60 | ASTM D523 | |
| Haze (38.1 µm) | 12 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 191 - 218 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 69 GF 30 TS | Plastcom | PP, Unspecified | SLOVALEN® |
| WELLAMID Nylon 6600 MR 309 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| Dryflex® 938012 | ELASTO | TPE | Dryflex® |
| Sylvin 5412-85 Natural | Sylvin Technologies Incorporated | TPE | Sylvin |
| Sylvin 9600-60 Clear Green 3161 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
