Order Products : sales@su-jiao.com
Braskem PP PCD 0140
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7MF3CG_Braskem-PP-PCD-0140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PCD 0140 is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was developed for steel pipe coating extrusion. PCD 0140 is highly protected against thermal ageing and designed for continuous use at high temperature. Applications: Undercoating, solid thermal coating, foam thermal coating Processing: Extrusion |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.905 | g/cm³ | ASTM D792 |
| -- | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec, Compression Molded) | 66 | ASTM D2240, ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 25.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation | |||
| Yield, Compression Molded | 5.0 | % | ASTM D638 |
| Yield, Compression Molded | 7.0 | % | ISO 527-2 |
| Break, Compression Molded | > 400 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | |||
| 1% Secant : Compression Molded | 1400 | MPa | ASTM D790 |
| Compression Molded | 1050 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 146 | °C | ISO 306/A, ASTM D1525 1 |
| Melting Temperature | 163 | °C | ISO 11357-3, ASTM D3418 |
| Oxidation Induction Time | |||
| 220°C | > 50 | min | ISO 11357-6 |
| 220°C | > 50 | min | ASTM D3895 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257, IEC 60093 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP6000 B96 | Spartech Polycom | PP, Unspecified | Spartech |
| THERMOLAST® K TP8LDZ (Series: UV/LD/b) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Ducor® 1100 H | Ducor Petrochemicals BV | PP Homopolymer | Ducor® |
| INEOS PP 300-CA06 | INEOS Olefins & Polymers Europe | PP Impact Copolymer | INEOS PP |
| Hifax CA 1110 G4 LS 1740 | LyondellBasell Industries | PP Copolymer | Hifax |
