Order Products : sales@su-jiao.com
INEOS PP N01N-00
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7MD7gW_INEOS-PP-N01N-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| N01N-00 is a high stiffness, impact copolymer specially designed for freezer-to-microwave performance. This extrusion grade resin exhibits an excellent balance of impact and stiffness properties, and combines high heat resistance with good gloss and thermoformability. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.906 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 30.1 | MPa | |
| Break | 15.2 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 6.5 | % | |
| Break | 150 | % | |
| Flexural Modulus - 1% Secant | 1620 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-20°C) | 53 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | ASTM D256 | ||
| -20°C | 5.30 | kJ/m² | |
| 23°C | No Break | ||
| Instrumented Impact, Ductility | ASTM D3763 | ||
| -20°C | Ductile | ||
| 23°C | Ductile |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 111 | °C | |
| 1.8 MPa, Unannealed | 60.6 | °C | |
| Vicat Softening Temperature | 154 | °C | ASTM D1525 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 75 | ASTM D2457 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PTS POM-25 | Polymer Technology and Services, LLC | Acetal (POM) Copolymer | PTS |
| Adell Polyamide AD-30 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| ALTECH® NXT PP-H A 2030/457 HH GF30 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® NXT PP-H |
| DURANEX® HN7315N/B | Polyplastics Co., Ltd. | PC+PBT | DURANEX® |
| Grilon® CR 8 | EMS-GRIVORY | Nylon 6/12 | Grilon® |
