Order Products : sales@su-jiao.com
Osterlene® PPC-.75-NB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7Lm5Hl_Osterlene-PPC--75-NB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PPC-.75-NB is a polypropylene nucleated high stiffness and high impact copolymer formulated for extrusion applications such as blow molding, profile, sheet and blown film. PPC-.75-NB meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. PPC-.75-NB offers the benefits of gas-phase technology along with high stiffness and high impact strength. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 83 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 8.9 | % | ASTM D638 |
| Flexural Modulus | 1340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -18°C | 110 | J/m | ASTM D256 |
| 23°C | No Break | ASTM D256 | |
| Unnotched Izod Impact (-18°C) | No Break | ASTM D256 | |
| Dart Drop Impact (-30°C) | 44.1 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 89.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 56.0 | °C | ASTM D648 |
| Additional Information |
|---|
| The value listed as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 232 - 254 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer FEA-241U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| VENYL UFRG204 | AD majoris | Nylon 66 | VENYL |
| NAXALOY® 780 GF11 | MRC Polymers, Inc. | PC+PBT | NAXALOY® |
| BCC Resins BC 8880 | BCC Products Inc. | TSU | BCC Resins |
| Centrex® 485CS | Network Polymers, Inc. | ASA | Centrex® |
