Order Products : sales@su-jiao.com
TEREZ PMMA 5003
| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | TER HELL PLASTIC GMBH |
| Trademark: | TEREZ PMMA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7DRcGP_TEREZ-PMMA-5003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Standard grade, injection moulding, good heat deflection temperature. Automobile brakelites, scratch resistant, optical high quality moulding parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 5.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3200 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 73.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.5 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (23°C) | 20 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 100 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 95.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 103 | °C | ISO 306/B50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® SJ8300C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| Starex BF-0930 | SAMSUNG SDI CO., LTD. | MABS | Starex |
| Durethan® DP 2131/20 W1 901317 | LANXESS GmbH | Nylon 6 | Durethan® |
| LOXIM 315 02 HB | LOXIM Industries Private Limited | Nylon 6 | LOXIM |
| LOXIM 120 01 V0 | LOXIM Industries Private Limited | PC | LOXIM |
