Order Products : sales@su-jiao.com
Stirol UPM-0508 (extra)
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 78n5nA_Stirol-UPM-0508-extra-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPM-0508 is for manufacturing of goods for technical purpose and goods of national consumption. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 4.0 to 7.0 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.1 | % | |
| Purity 2 | 10.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strain (Break) | > 25 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 5.5 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±10% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAPYLENE GF40HKB | Sahel Chimie Co. | PP, Unspecified | SAPYLENE |
| ADDINYL B2 V40 | ADDIPLAST | Nylon 6 | ADDINYL |
| Geon™ SF M7020 | PolyOne Corporation | PVC, Rigid | Geon™ SF |
| Zytel® FG101 NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| 3M™ Dyneon™ Fluoroelastomer FE 5625N | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
