Order Products : sales@su-jiao.com
Zhongfa ABS FR-765
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Yuyao Zhongfa Engineering Plastics Co. Ltd. |
| Trademark: | Zhongfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 78XBEW_Zhongfa-ABS-FR-765.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zhongfa ABS FR-765 is an acrylonitrile butadiene styrene (ABS) material,. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of Zhongfa ABS FR-765 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 2.2 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 99 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 38.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 15 | % | ASTM D638 |
| Flexural Modulus | 2300 | MPa | ASTM D790 |
| Flexural Strength | 62.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.2 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.20 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| Notched Izod Impact, ASTM D256: 12 kJ/m²Unnotched Izod Impact, ASTM D256: No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 85.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Processing (Melt) Temp | 195 - 225 | °C | |
| Mold Temperature | 40.0 - 80.0 | °C | |
| Injection Pressure | 60.0 - 90.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® PX10 X06 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| NORYL GTX™ APS430 resin | SABIC Innovative Plastics Asia Pacific | PPS+PPE | NORYL GTX™ |
| Axiall PVC 9190 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Grilon® TSZ 3 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| Lutene® H ME2500 | LG Chem Ltd. | HDPE | Lutene® H |
