Order Products : sales@su-jiao.com
UBE Polyethylene B128
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 787kMB_UBE-Polyethylene-B128.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBE Polyethylene B128 is a Polyethylene material. It is available in North America for blow molding. Primary attribute of UBE Polyethylene B128: Rigid. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.928 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Apparent Bending Modulus | 210 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 102 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silamid® EN | Roonamid a.s. | Nylon 6 | Silamid® |
| TAIRIPRO K3004 | Formosa Plastics Corporation | PP Impact Copolymer | TAIRIPRO |
| Yanshan PE LD160 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Nypol® PA B3 T10 TZ PRTA011 NT382 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| LEXAN™ FST9705 resin | SABIC Innovative Plastics | PC | LEXAN™ |
