Order Products : sales@su-jiao.com
Hostacom DRC725D
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostacom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 75Ddg4_Hostacom-DRC725D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This information has been secured during the course of product development. Both the product and its properties are subject to change before final commercialization. Hostacom DRC725D high melt flow, 1,300 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent combination of properties and processability. It was designed for painted applications that require a good balance of rigidity and low temperature impact performance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 21 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 10 | % | ISO 527-2 |
| Flexural Modulus | 1300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 38 | kJ/m² | ISO 180 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1301 L | RTP Company | PPS | RTP |
| PTFA 25 | Polymer Tailoring Ltd. | Polyolefin, Unspecified | PTFA |
| DENIFORM 0037 ST | Vamp Tech | Acetal (POM) Copolymer | DENIFORM |
| Lucky Enpla LGF5330 | Lucky Enpla Co LTD | Nylon 6 | Lucky Enpla |
| Durethan® AKV 25 F30 000000 | LANXESS GmbH | Nylon 66 | Durethan® |
