Order Products : sales@su-jiao.com
KW Plastics KWR102CA25
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 74tcxv_KW-Plastics-KWR102CA25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer High Density Polyethelene Post-Consumer Resin Compounded with 25% Calcium Carbonate CHARACTERISTICS Increased stiffness, faster processing, improved heat deflection, lower cost. Available as mixed color and pre-colored black. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 0.43 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 11 | % | ASTM D638 |
| Flexural Modulus | 1530 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 45.8 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC V847 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| AKROMID® T1 GF 50 9 black (3257) | AKRO-PLASTIC GmbH | PPA | AKROMID® |
| LEXAN™ FL930 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| LUVOCOM® 50-9022 | Lehmann & Voss & Co. | PC | LUVOCOM® |
| Osterlene® PPH035LWC | Osterman & Company | PP Homopolymer | Osterlene® |
