Order Products : sales@su-jiao.com
CP PRYME® Polyethylene PE100HDH-8M
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chase Plastics Services Inc. |
| Trademark: | CP PRYME® Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 71M76A_CP-PRYME-Polyethylene-PE100HDH-8M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP PRYME® Polyethylene PE100HDH-8M is a High Density Polyethylene product. It can be processed by injection molding and is available in North America. Typical application: Food Contact Applications. Primary characteristic: food contact acceptable. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.963 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 50 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 965 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Siloxane Masterbatch MB25-302 | Multibase, A Dow Corning Company | Siloxane, UHMW | Siloxane Masterbatch |
| Sumikon® PM-6430 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Sumikon® |
| Vipel® F701-SPT-15 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| Hyundai EP XLPE XL120R/Natural | HYUNDAI EP Co., Ltd. | XLPE | Hyundai EP XLPE |
| INFUSE™ 9077 | The Dow Chemical Company | OBC | INFUSE™ |
