Order Products : sales@su-jiao.com
Generic PC+Acrylic
| Category: | PC+Acrylic , Polycarbonate + Acrylic (PMMA) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 71EtOO_Generic-PC-Acrylic.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PC+Acrylic This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.55 - 0.71 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1930 - 2420 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 41.4 - 54.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 9.9 - 10 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2060 - 2280 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 78.7 - 86.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 180 - 1600 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.0 - 82.5 | °C | |
| Drying Time | 3.5 - 4.6 | hr | |
| Processing (Melt) Temp | 227 - 252 | °C | |
| Mold Temperature | 48.9 - 82.2 | °C | |
| Injection Pressure | 68.7 - 69.3 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PC+AcrylicThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unipren® Elastomers B3 PRTA010 45A UP313 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Evermore PUR SA-6066 | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| LUVOCOM® 1105-8278/GY | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| LUVOCOM® 65-8640 | Lehmann & Voss & Co. | PP Copolymer | LUVOCOM® |
| OTECH PVC OW134 - Automotive Insulation | OTECH Corporation | PVC, Unspecified | OTECH PVC |
