Order Products : sales@su-jiao.com
Alathon® M6030
| Category: | HDPE, MMW , High Density (MMW) Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6un9GT_Alathon-M6030.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON M6030 is a medium molecular weight high density homopolymer with extremely low gel content. Typical applications for this resin are cast film, coextrusion and dry food packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 689 | MPa | |
| TD | 827 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 22.1 | MPa | |
| TD : Yield | 20.7 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 860 | % | |
| TD : Break | 850 | % | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 20 | g | |
| TD | 500 | g |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 199 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Witcom PEEK 3C-EM | Witcom Engineering Plastics B.V. | PEEK | Witcom PEEK |
| Hipolyene 3020 HC RM | Zylog Plastalloys | TPO (POE) | Hipolyene |
| Idemitsu PS SEHI-104 | Idemitsu PS | PS (HIPS) | Idemitsu PS |
| POFEX EP8300S 70DM | POLYROCKS CHEMICAL CO., LTD | TPU, Unspecified | POFEX |
| FUDOWLITE® FC4420 | Fudow Co., Ltd. | Phenolic | FUDOWLITE® |
