Order Products : sales@su-jiao.com
Sarlink® TPV X11059DB
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPV |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6uNUou_Sarlink-TPV-X11059DB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The Sarlink 11000 Series of slip coating materials offer extremely low coefficient of friction against glass, and can be co-extruded with TPE-S, TPE-V, and EPDM. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 5 sec, Injection Molded) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | 0.25 | ASTM D1894 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D412 | ||
| Across Flow : Break | 24.0 | MPa | |
| Flow : Break | 28.0 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Across Flow : Break | 99 | % | |
| Flow : Break | 30 | % | |
| Tear Strength - Across Flow 2 | 94 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 206 sec^-1) | 552 | Pa·s | ASTM D3835 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 177 to 210 | °C | |
| Cylinder Zone 2 Temp. | 182 to 216 | °C | |
| Cylinder Zone 3 Temp. | 193 to 227 | °C | |
| Cylinder Zone 5 Temp. | 193 to 227 | °C | |
| Die Temperature | 193 to 227 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Method Ba, Angle (Unnicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIBUR Synthetic Rubber NBR 3330 | SIBUR, LLC | NBR | SIBUR Synthetic Rubber |
| TITANEX® HM1031 | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANEX® |
| WACKER® FC 205 | Wacker Chemie AG | Silicone | WACKER® |
| NYLAFORCE® dynamic A 60 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | NYLAFORCE® dynamic |
| ULTEM™ 2410R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
