Order Products : sales@su-jiao.com
DuraGrip® DGR 6160NC
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6sb7W5_DuraGrip-DGR-6160NC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® DGR 6160 is offered in an NC (colorable) version, and is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT, and PC/PBT alloys. It is easy to use in injection molding and extrusion processes. DGR 6160NC has excellent elastomeric properties and soft touch feel. DuraGrip® bonding grades are hygroscopic, and for best results drying is recommended prior to use. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792, ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 65 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.30 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 14.2 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 550 | % | ASTM D412, ISO 37 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 200 sec^-1) | 354 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| The value listed as Density -Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 204 - 221 | °C | |
| Middle Temperature | 216 - 227 | °C | |
| Front Temperature | 227 - 238 | °C | |
| Nozzle Temperature | 227 - 249 | °C | |
| Processing (Melt) Temp | 227 - 254 | °C | |
| Mold Temperature | 43.3 - 54.4 | °C | |
| Injection Pressure | 2.76 - 5.52 | MPa | |
| Screw Speed | 50 - 150 | rpm |
| Injection instructions |
|---|
| Injection Speed: 1 to 3 in³/secInjection Time (1st Stage/Boost): 0.5 to 4 secSecond Stage Pressure: 300 to 500 psiSecond Stage Time: 3 to 10 secCooling Time: 10 to 25 secBack Pressure: 25 to 75 % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 287 TFE 15 | RTP Company | Nylon 66 | RTP |
| RTP 1103 | RTP Company | PET | RTP |
| Yanshan PE 8200B | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| EPO-TEK® OG178 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Taizhou Plastic PA-A6-1 | Taizhou Plastic Co., Ltd. | Nylon 6 | Taizhou Plastic |
