Order Products : sales@su-jiao.com

Axpoly® PP19 1014

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Axion Polymers
Trademark:	Axpoly®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6on7QW_Axpoly-PP19-1014.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PP19 1014 High melt flow Polypropylene resin grade Black Axpoly® PP19 1014 is a high-performance black homo-polymer Polypropylene grade, that has a high melt flow index. Good melt-flow rheology is needed in products with thin walls and where fast cycle time is key to the injection moulding operation. Produced from 100% post industrial raw materials, this product fts closely with our other Axpoly® recycled resin grades and offers the same set of user benefts, including: Successfully replaces virgin resin Huge savings in CO 2 impact - at least 80% Appeals to ‘greener' customers Cost-down on raw material

Message

PP19 1014 High melt flow Polypropylene resin grade Black

Axpoly® PP19 1014 is a high-performance black homo-polymer Polypropylene grade, that has a high melt flow index. Good melt-flow rheology is needed in products with thin walls and where fast cycle time is key to the injection moulding operation.

Produced from 100% post industrial raw materials, this product fts closely with our other Axpoly® recycled resin grades and offers the same set of user benefts, including:

Successfully replaces virgin resin

Huge savings in CO 2 impact - at least 80%

Appeals to ‘greener' customers

Cost-down on raw material

General Information
Recycled Content	Yes
Features	Fast Cure High Flow Homopolymer
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.970	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	50	g/10 min	ISO 1133
Water Absorption (Equilibrium, 23°C, 50% RH)	0.17	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress	23.0	MPa	ISO 527-2
Tensile Strain (Break)	30	%	ISO 527-2

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact Strength	6.7	kJ/m²	ISO 180

Additional Information	Nominal Value	Unit
Pellet Size	3.00	mm

Resin Grade	Manufacturer	Category	Trademark
NILAMID® A2 H J10	Nilit Plastics	Nylon 66	NILAMID®
Daelim Po1y® LD-18AS	DAELIM INDUSTRIAL CO., LTD.	LDPE	Daelim Po1y®
Flontech® FT-GR15-1	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
LAMIGAMID® 600	Schwartz Technical Plastic	Acetal (POM) Copolymer	LAMIGAMID®
POCAN® T 7323 000000	LANXESS GmbH	PBT+PET	POCAN®