Order Products : sales@su-jiao.com
Escorene™ Ultra FL 00206
| Category: | EVA , Ethylene Vinyl Acetate Copolymer Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Escorene™ Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6n1sGG_Escorene-Ultra-FL-00206.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FL 00206 is a copolymer of ethylene and vinyl acetate. When the processing temperature is higher than 280 C (536 °F) in processing conditions, resin degradation may be caused. The machine should be thoroughly cleaned with low density polyethylene or suitable detergent before stopping. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 6.5 | wt% | ExxonMobil Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 105 | MPa | ISO 527-2/1A/1 |
| Tensile Strain (Break) | > 100 | % | ISO 527-2/1A |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% secant, MD | 120 | MPa | ASTM D882 |
| 1% secant, TD | 140 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Fracture | 24.0 | MPa | ASTM D882 |
| TD : Fracture | 22.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 400 | % | ASTM D882 |
| TD : Fracture | 600 | % | ASTM D882 |
| Dart Drop Impact | 280 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 130 | g | ASTM D1922 |
| TD | 130 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 81.0 | °C | ASTM D1525 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polylink Polymer P-11020-GF | Polylink Polymers (India) Ltd. | TPO | Polylink Polymer |
| SLOVAMID® 6 GF 30 FRA 3 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| HiFill® ABS GF50 | Techmer Engineered Solutions | ABS | HiFill® |
| Plenco 05482 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| Polimid A SG/5 | Poliblend S.p.a. | Nylon 66 | Polimid A |
