Order Products : sales@su-jiao.com
SABIC® LDPE nExCoat 5
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6lpGM2_SABIC-LDPE-nExCoat-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC ® LDPE nExCoat 5 is a revolutionary tubular grade without additives, which is specially developed for the extrusion coating market. Its special molecular structure provides a unique combination of properties: processing on very high line speeds, excellent adhesion on different substrates (both at lower extrusion temperatures) and excellent sealing properties, very low gel count, low MFR drop during processing and a lower extruder motor load. SABIC ® LDPE nExCoat 5 is suitable for all typical extrusion coating applications, such as liquid packaging, imaging, food packaging, release liners and building & construction and can be used for coating on paper, board aluminium foil or other substrates (especially temperature sensitive). Moreover, it can be employed in lamination applications, due to its excellent adhesion properties. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 2.00 mm, Compression Molded) | 12.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break, 2.00 mm, Compression Molded) | 600 | % | ISO 527-2/50 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-3 | ||
| MD : Yield, 25 µm | 7.50 | MPa | ISO 527-3 |
| TD : Yield, 25 µm | 7.50 | MPa | ISO 527-3 |
| MD : Break, 25 µm | 13.0 | MPa | ISO 527-3 |
| TD : Break, 25 µm | 13.0 | MPa | ISO 527-3 |
| Tensile Elongation | ISO 527-3 | ||
| MD : Break, 25 µm | 400 | % | ISO 527-3 |
| TD : Break, 25 µm | 550 | % | ISO 527-3 |
| Elmendorf Tear Strength | ISO 6383-2 | ||
| MD : 25 µm | 45000 | N | ISO 6383-2 |
| TD : 25 µm | 45000 | N | ISO 6383-2 |
| Oxygen Permeability - 0% RH per 24h (23°C) | 0.80 | cm³/cm²/bar | ISO 15105-2 |
| Water Vapor Permeability - 90% RH per 24h (38°C) | 20.0 | g/m² | ISO 15106-3 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Enthalpy Change | 100 | J/g | DIN 53765 |
| Vicat Softening Temperature | 88.0 | °C | ISO 306 |
| Melting Temperature (DSC) | 107 | °C | DIN 53765 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMTAL PM7002 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| TAROMID B 280 R1 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| Trexlink™ 4770 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | Trexlink™ |
| Colorite 12 Series 6512 | Colorite Polymers | PVC, Unspecified | Colorite 12 Series |
| DIALAC® TW20 | UMG ABS, Ltd. | ASA | DIALAC® |
