Order Products : sales@su-jiao.com
DOW™ HDPE 35054L
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6kfg0y_DOW-HDPE-35054L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDPE 35054L is a bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance of mechanical properties and a very high Environmental Stress Cracking Resistance (ESCR). Applications:
Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.29 | g/10 min | |
| 190°C/21.6 kg | 27 | g/10 min | |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F50) | > 500 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 24.0 | MPa | |
| Break | 34.0 | MPa | |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 840 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYREX® PG-22 | CHI MEI CORPORATION | PS (GPPS) | POLYREX® |
| TOTAL Polypropylene PPC 4944CWZ | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
| NEXT REPROCESSED POMC M90-100R | NEXT Specialty Resins, Inc. | Acetal (POM) Copolymer | NEXT REPROCESSED |
| Akulon® Ultraflow K-FG0 | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
| INSULCAST® 985 FR | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
