Order Products : sales@su-jiao.com
Nyloi B2 GF/30 TF/15 NATURALE
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Nyloi |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6hTZl3_Nyloi-B2-GF-30-TF-15-NATURALE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nyloi B2 GF/30 TF/15 NATURALE is a Polyamide 6 (Nylon 6) material. It is available in Europe, Latin America, or North America for injection molding. Important attributes of Nyloi B2 GF/30 TF/15 NATURALE are:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Molding Shrinkage | 0.45 | % | Internal Method |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 5.7 | % | |
| Equilibrium, 23°C, 50% RH | 1.7 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9500 | MPa | ASTM D638 |
| Tensile Strength (Break) | 170 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 8000 | MPa | ASTM D790 |
| Coefficient of Friction | ASTM D1894 | ||
| vs. Steel - Dynamic | 0.61 | ||
| vs. Steel - Static | 0.41 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 13 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 205 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 250 | °C | |
| Middle Temperature | 270 | °C | |
| Front Temperature | 280 | °C | |
| Mold Temperature | 80.0 to 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Safrene® M 5010NAT80 | Safripol (PTY) LTD | HDPE | Safrene® |
| Sylvin 5187-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| T-Blend® 3004N-PE | TSRC Corporation | TPE | T-Blend® |
| NYLOY® MG-0033N | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| Akulon® Ultraflow K-FKGS6 /B | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
